Water remineralizing filter, specific for soft and somatized water with low salinity.

 These filters are specially designed for small and medium flow rates of mineralized water with an upper multivalve with automatic or manual operation. Due to their wide range of flow rates they can be applied for industrial, commercial and domestic use.

The supply options are:

• Filters with automatic valve: The valve will activate the washing process on a timed basis without the presence of the person in charge of the filter operation being necessary. An electrical connection is required for the operation of the filter.
• Manual valve filters: The valve must be activated for the washing function by the person in charge of the installation. They do not require electrical connection for its operation.
• The choice of the filter working system will depend on multiple factors that our engineers will be able to advise you.

Technical data of a remineralizing filter with head valve

• Body made of fiberglass reinforced polyester.
• Manual or automatic valves according to customer's request.
• Inlet and outlet pressure gauges to control the pressure loss during washing.
• All our filters come with the load and filtering bed included.
• Maximum working pressure 8 bar.
• Working temperature 0 to 35º C.

Equipment included in the remineralizing filtering unit

• Automatic or manual control head option for working/washing (the difference between manual and automatic operation is the need for the operator to be present during the washing to operate the valve).
• Calcium carbonate filter bed suitable for drinking water.
• Kit of lower nozzles.

Contact us without obligation by phone or email for any technical advice or purchase of our equipment.